What’s up, Insiders? DeucesJack, I’m at VapingInsider.com. Today, we’re going to be going over a mouth-to-lung RTA. I’m talking about the BD Vape Precisio. This is a legitimate mouth-to-lung RTA. I’m going to tell you that, right off the jump. I’m also going to tell you, this is a little flavor banger.
Before we get into the video, head on over to our Facebook group. We’re going to have a link down below. The bigger the group gets, the stronger we get, the more informed we are. Head on over there and check it out. There’s a great group of people over there.
FROM TOP TO BOTTOM
Here’s the atomizer right here. You can see, nice-looking atomizer. Big, thick ultem glass. Nice drip tip with a heatsink on it. This part, the ultem, does come off. I don’t know if there’s going to be other colors available. It would be kind of nice if they made other colors with other color tank sections so you can mix and match. That would be kind of cool if they did that. Drip tip does come out. It is a 510 drip tip. Fits nice and snug. Got some knurling, very fine knurling on top of here but definitely aid. You’re getting a grip. Decent machining on the top cap, nothing wrong with it. Nice, big juice fill ports. A little bit of a recession so you don’t make a mess. Real narrow bore chimney. I do like these big juice ports. Awesome, awesome job. As I said, the machining on the top cap is definitely smooth. It’s smoother than the machining on the bottom, on the base, which I’m going to show you in a minute. Again, very fine knurling over here. Here is your airflow, this is the mouth-to-lung part right here. You have a bunch of little holes, you can close down one at a time okay and then you can go all the way to the side here for a wide-open restrictive DL hit, is what I would call it. On the bottom side, you can see, gold-plated 510, insulator ring around it, stainless steel threading around that.
In order to get to your deck, you have to spin the base and I gotta say, I’m really disappointed in the threading on the base. It seems like it’s very thin and it has a hard time catching when you put the base back on. Considering the threading over here is really nice, the base should definitely be better. But check out that conical domed design and it’s very, very small. You’re going to get great flavor. I knew it as soon as I opened it up. The flavor on this will be bangin because of that doming and that small space inside.
Here’s the deck. I installed the coil they had in the kit. You can see, you got big, beefy flathead post screws right there. You can put your coil on either side of them. I’m not going to do a build. I will show you how to wick it but this is such an easy deck to build on. It’s one of the easiest decks I ever built on, bar none. You basically just lay your coil in there and tighten down those big post screws. Real easy, easy stuff. Again, this is the coil that they included in the kit. Maybe it needs a little bit of an adjustment. That’s how you want to mount it, right like that, right above that bottom airflow. You can see, the airflow is right underneath the coil right there and that’s where you want your coil sitting so it grabs all that flavor. The airflow comes through there and underneath your coil, you see how on the bottom my cotton is barely peeking out? That’s what you want it to look like. You don’t want your cotton hanging out of the bottom. You want it barely peeking out.
The juice we’re going to be using today is Vape Craft, French Vanilla Cheesecake. This was sent to me in my sample box. We’re going to be doing a sample box review real soon. Now you want to do is you want to make sure you wet those wicks up. Get that coil nice and wet, get that cotton nice and wet. Just get it all started. Maybe give it a quick test fire. We got vape and it smells phenomenal. I can’t wait to vape on this juice. I haven’t tried it yet but french vanilla cheesecake is definitely my jam.
Once you’re all wicked and wet, you take your base and you definitely want to be careful with this. You want to do a reverse thread, make sure it catches because the threading on the base and the barrel is just very, very thin. It’s not the greatest. It has a hard time catching so just be aware of that. Once it does catch, you’re going to get some resistance. Just go past the resistance and make sure you thread it on nice and tight and you should wind up with something that looks like that. Now we’re going to do, we’re going to pop that top cap off and we’re going to give this thing a fill-up. Take our french vanilla cheesecake, give it a nice squeeze. We’re filled up to the very top. Put our top cap back on and now we’re ready to slap this thing on a mod and vape on it.
WHAT’S IN THE BOX
- 7 x O Ring
- 3 X Screw
- 3 X Japanese cotton
- 2 X DIY coil
Alright, Insiders! Let’s go after those cons and pros. we’re going to start off with cons as usual.
First, con is going to be, that ultem section. It kind of screws out I hate it. I don’t like it. I wish they would have used glass. I just think the glass is much classier. Yeah, I understand it can break. The Ultem is a lot tougher. But I don’t like Ultem. I don’t like the look of it.
And the only other con I have for this is with the deck. While you do get those nice, big screws that capture the leads, I do wish they went with a clamp system. I think of something this good, they should have gone the extra mile and put some clamps in it. That would have made this thing that much better.
But that’s it, Insiders! There is not a lot to complain about here. This thing is fantastic RTA. Let’s talk pros.
The first pro is going to be, the fit and finish on things are absolutely fabulous. Great job, BD vape. I believe there are companies owned by Fumytech. Build quality on this is outstanding.
Great mouth-to-lung addie. Let me show you what I’m talking about here. I’m not running the holes. I’m running just a single slot. I got it about a quarter away shut. Check it out, just beautiful. And the flavor, the flavor is fantastic. It’s saturated, it’s got smooth airflow. The flavor is just banging on this thing. If I open it up all the way, if I open it up all the way, I can almost DL hit it. Like you can get a very restrictive DL. Watch, not bad for a little thing at 20W. That’s not bad at all. Now, if I go to the holes on the airflow and I run all the holes open, it definitely gets more restrictive. Check it out. But still, the flavor, the flavor is just fantastic.
This one’s easy to build and wick. It’s got a very smooth airflow range.
I love the range of this RTA. It’s got from a really restrictive DL hit to a very tight mouth-to-lung hit and anywhere in between. The range on this thing is just beautiful. You die-hard mouth-to-lungers, this is a must-own tank.
That’s it, Insiders. Those are my cons and pros. Let’s talk about this one a bit.
Love the build quality on this thing, love the performance, love the flavor. It’s even got really nice cloudage for a mouth-to-lung tank. It’s just a fantastic atomizer. I get a very dense flavorful vape. One of the best vapes I’ve ever gotten off a mouth-to-lung tank. In fact, let me get another vape. Beautiful. So far, hands down. This is the best mouth-to-lung tank I’ve used in 2019. This one is DeucesJack approved. Go out, check the link down below and get yourself one. You can thank me later.
Let’s go over some of the specs on the BD Vape Precisio RTA. It’s 22mm in diameter. It weighs 47g and it’s 40mm high. It has a 2.7ml capacity. It is a single-coil atomizer. It’s available in stainless steel and black. There is an optional tank extender in stainless steel available for it as a separate purchase.
- Capacity: 2.7 mL
- Size:22*52.7 mm
- Style:MTL & Middle MDL
- Drip tip: 510
- Battery connector:510
Want to give a huge shout out to Fumytech for sending this one my way. I’ve really been enjoying this one and I appreciate the support of the channel, Fumytech. Hey Insiders, make sure you head on over to our Facebook group. It’s a great group of people over there. Very well-informed people. You’ll always have the latest information over there when it comes to advocacy. We’re always talking about vaping. It’s drama-free. I highly recommend it. Click that link down below.
That’s it, Insiders. That’s all I got for you today. Make sure now, more than ever, it’s more important than ever that you keep living that vape life. We’re out. Deuces.
- flavor is fantastic
- Great mouth-to-lung addie.
- smooth airflow
- easy to build and wick
- range on this thing is just beautiful.
- Ultem Tank section
- could have used a clamp system