Five-Star Rating System
As far as looks go, I give the Dovpro Ohmage a 2.5. It’s got an average look, maybe it’s a little bit on the aggressive side. But as far as looks go it’s nothing groundbreaking. It’s only available in black and stainless steel, so it’s not like you can get all kinds of different colors on it. I got to give it a 2.5 in that category.
I do like the coils on the Ohmage. They fit nice and snug, it’s a plug and play style coil, I like that. I like that Mr JustRight 1 tried to do something innovative with the double stacked mesh coils. I watched his presentation video, I liked the way he thought out making the cotton thinner on one part of the coil. I think it’s innovative, so I got to give him props for that. The coil does have good longevity to them and I’ve been getting good flavor off them. It’s just the coil itself doesn’t generate a lot of heat and I like a hotter, more saturated vaping experience, so I’ll give it a 3.5, and I kind of feel bad about scoring it at a 3.5. I wanted to give it higher because of all the other things, but the coolness just brought the stars down in this category.
When I first saw the Dovpo Ohmage, I said, “Wow, this looks great you’ll be able to really dial it in.” But the airflow is really between a restricted DL to a middle-of-the-road mouth to lung. It’s really not tight enough for me as far as a mouth to lung goes, even when I only vape it with one hole open. And I feel like the airflow, as far as the spectrum goes, it’s all over the place. It’s almost… it doesn’t know what it wants to be when it grows up, that’s kind of the way I feel about the airflow system on the Ohmage.
I do like the way it vapes in mouth to lung mode. I can get a very good mouth to lung vape off of it, I do wish it was a little tighter. In DL mode, it’s just way too cool for me for the amount of airflow that’s going through it, I just wish it was hotter. But the saving grace on the airflow is it’s extremely smooth. So with all that said, I’m giving the Dovpo Ohmage a 3-star rating in the airflow category. A little better than average.
So let me show you what I mean when I say what I say about the airflow. Here it is, wide open at 55 watts… Nothing wrong with that as far as clouds go, the flavor’s really nice. It’s just not hot enough for me. Now if I cut it down about halfway, I’ll close three holes and leave three holes open… I can still DL it but I’m really not getting that much more warmth. If I take the mod and knock it down to 40 watts and I go to just the two smallest holes on it, try to mouth to lung it, watch… It’s a very loose mouth to lung. If I cut it down the one hole… again, very loose mouth to lung. So if you’re into a loose mouth to lung or a restricted DL and a cool vape you’ll like it. But to me, it’s just too cool on either side of the spectrum. I really wish the mouth to lung vape was a little warmer, I probably would have scored it higher in this category.
As far as value goes, I’ve been seeing the Ohmage for around $30. $30 with five coils makes it a very good value, especially if you’re a low wattage vaper that likes a cooler vaping experience. Then it’s a really good value, so we’ll give the Dovpo Ohmage a solid 4 stars in that category.
Add all the stars up and you come up with a total review score of 13 for the Dovpo Ohmage. We’ll take that 13 and average it out by dividing it by 4 and you get a 3.25 or three and a quarter star rating. And I think that’s a fair review rating on this Dovpo Ohmage sub ohm tank for what it is.
- The airflow is super smooth. It’s got a nice smoothness to it, not turbulent at all.
- The Dovpo Ohmage has got good build quality. You can mouth to lung or direct lung hit, so it’s kind of versatile, I got to give it a pro for that.
- It’s actually got good flavor, that’s a pro.
- it comes with five Dovpo Ohmage replacement coils, which is a huge pro. Awesome, awesome job on that, Dovpo and Mr.JustRight1.
- The Ohmage comes with proprietary coils. You know, it wouldn’t be that bad if it was a company like Smok, where you could get the coil all over the place and their proprietary coils really aren’t proprietary because of their distribution. The problem is, Dovpo really doesn’t have a history of doing sub ohm tanks, so who knows if you’re going to be able to find these five or six months down the road. It’s an issue that I have to bring up, it’s a con.
- I’m going to get into it a little more when I talk about the airflow, but the vape on this Ohmage sub ohm tank is just way too cool for me. It’s just not hot enough. I like a hotter vape, so I got to give it a con for that. But that’s it on the cons. Pretty subjective, especially the cool vape con. Some people like it cool.
What’s up, Insiders. DeucesJack at VapingInsider.com. Today we’re going over The Dovpo Ohmage.
The Dovpo Ohmage is a collaboration between Dovpo and Mr.JustRight1. He’s the guy that did the Profile RDA.
From Top To Bottom
Let’s check this thing out, I got high hopes for it.
Pretty simple packaging for the Dovpo Ohmage. You got a spare glass tank right there, we’re going to be installing that. And here is the actual Ohmage sub ohm tank. Now, I have to say the first time I took a look at this tank I was like, “Wow man, that thing’s kind of aggressive-looking… almost looks like it’s got some shoulders on it”.
I don’t know what that little drip thing is there. I watched Mr.JustRight1’s presentation and the other ones had a swirly type of drip tip. I’m thinking I just got a black one with just that little white swirl on it. It almost looks like a teardrop. It’s actually kind of cool, but wacky-looking at the same time.
On the bottom here you can see you got your adjustable airflow. You have these 6 different holes that taper down so I’m thinking you can get from a mouth to lung or at least a restrictive DL (direct lung) hit on it. Kind of interesting.
On the top here you got a Goon-style drip tip, all your other Goons will fit fine on the Ohmage. And this top cap, it’s knurled really rough. You get a nice grip on it; half a twist and it’s off. You got a nice big gasket there keeping the e juice at bay. Decent-sized fill ports over here, nice looking Ohmage sub ohm tank, Dovpo.
On the bottom of the atomizer, you can see Dovpo branding, serial number, Ohmage logo, Mr JustRight1. Gold-plated 510, white insulator ring around it, stainless steel threading around that. In order to get to your coil, just pop open the base and you can see gold plating on the base, gold plating on the pre-installed dual stacked mesh coil. Threading is okay; nothing special, nothing terrible. In order to pop the coil out, it’s one of those plug-and-play coils, you just pop it out. And we’re going to go over the coil and a lot more detail in a second.
I just want to point this out to you while we’re here. See those slots right there? That’s going to feed your e juice to your coil. So the nice thing about this is if you have a full Ohmage sub ohm tank you can just turn it over, pop the coil out, switch the coil out and not worry about losing your e juice.
Here’s the pre-installed coil. 0 .2ohm mesh coil, good for 40 to 55 watts. Now when you first look at this coil you say that it’s just a regular dual stacked mesh coil. Well, no it’s not. When I watched Joel’s (Mr.JustRight1) presentation video—because that’s what I do when I go over most reviews of products, I watch their presentation video so I can understand where their mindset was when creating whatever device I’m reviewing. And I kind of like to walk down their spine and see what they were thinking—so what Joel said was he’s got mesh up here and another mesh over here so it’s stacked one on top of the other. Dual stacked mesh coils. Now that’s innovative.
Now this is a proprietary coil so… I don’t know, Dovpo is a pretty big company, they’ve gotten big in the last year, so you might not have a hard time getting it online. But as far as the vape shop goes, you might have a little bit of an issue. But it’s a cool concept because think about it, the bottom is creating vapor, the top is creating vapor.
Now, Joel said was the cotton on the bottom is packed a little tighter than the cotton on top because they wanted the cotton on top to be able to keep up with the cotton on the bottom. So that makes a lot of sense, and I’m really, really excited to actually try this new type of coil out.
What’s In The Box?
Also included in the Dovpo Ohmage packaging are the spare parts; a bunch of spare o-rings, a social media card, a QC certificate, a user manual, and you get four spare coils. So you get five in total. That’s unbelievable. I’ve never, ever seen that done before, I really haven’t. Great job Dovpo and Mr.JustRight1, five coils for the Ohmage is an awesome, awesome job.
So basically what you’re getting with the Ohmage are three 0.2 ohm coils, the coil that I went over already. And then you’re going to get two 0.16 ohm coils, good for 30 to 45 watts. Now, that’s weird because this has a low resistance, yet the recommended wattage is lower than the 0 .2ohm one. That’s normally not the way things happen in the vaping industry. Normally the lower the resistance, the more power you need to the coil. So I’m interested in trying both of these out and seeing what the actual difference is. But I don’t know if that stack thing made a difference when Dovpo did this. It’s going to be interesting to try them both because the 0 .16ohm is rated 10 watts lower than the 0 .2ohm, so that’s going be interesting.
When I pop them open, the mesh inside definitely looks tighter, definitely looks like you have more surface area. So I’m assuming it’s the same mesh on the bottom, so that’s kind of weird that you’re not running more wattage through it. I just don’t get that. I mean, they seem to be—see that, see them side by side—40 to 55, 30 to 40. I don’t understand that. I mean… look, they almost look the same. Kind of weird. Going to be very interesting to try these two side-by-side.
In the spare o-ring bag of the Ohmage, you also get this tool so you can swap the glass out, we’ll do that right now. So in order to swap the glass out, you take your little tool here and just give it a little twist. Get that top fill port cap moving. Once it’s loose enough, you just unscrew it. Now remove the straight glass, take the bubble glass, we’re going to install this—and by the way, I believe the bubble glass almost doubles your capacity, so that’s cool. You guys know I’m all about the bubble—threading on this, it’s okay. It’s not terrible, it’s not great. Take our little tool, we’re going to put it in there and we’ll tighten this down, make sure it’s nice and snug. And there you go, you just doubled your capacity and the bubble glass is installed.
The juice we’re using today for the Ohmage is Johnny’s Juice in strawberry custard donut flavor. Man, if you haven’t tried this guy’s donut juices, they’re fantastic. I have yet to get a bad juice from Johnny’s over at Facebook, go check him out.
So we’re using the 0 .2ohm coil. Now, the interesting thing was, Mr.JustRight1 said that in order to prime this what you got to do is put your finger on the bottom, and put a couple of drops of juice right down the middle. That’s what he said in this presentation video, and give it a little shake, kind of roll it around in there, let it get all saturated. So that’s how I prime this.
Now we’re taking our primed coil and pop it in there for coil installation, it just slides in there, and make sure it’s down all the way. Now we’re going to take our base section, a little reverse-thread let it catch, and then we’re going to screw that on. Now we’re going to take this Johnny’s Juice strawberry custard donut, I’m just going to give it a nice fill, all the way up to the top. We’re going to take our top cap, pop it on there, half a twist, take our funky styled drip tip, pop that on there and now it’s all ready to go. I think I got the perfect mod for this Dovpo Ohmage sub ohm tank. I’ll put it on my Cold Steel 100. I think it’s 26 and a half millimeters, doesn’t look bad on there at all. I like that, I’m definitely digging that, this Dovpo Ohmage looks badass.
- Dimensions: 25×53 millimeters
- Colors: Black and Silver
- Juice Capacity: 2ml (straight glass), 5.5ml (bubble),
- Coils: 3×0.2 ohm, 2×0.16 ohm
I want to thank Dovpo for sending this Ohmage my way for review. Be sure to click here to join our Facebook group for more exclusive, behind-the-scenes content.
And that’s it, Insiders, that’s all I got for you today. You keep living that vape life. We’re out of here. Deuces.
- Smooth Airflow
- Good Build Quality
- MTL or DL Hit
- Good Flavor
- Comes with 5 coils
- Proprietary Coils
- Cool Vape